Bondtech LGX Lite extruder med motor

Bondtech LGX Lite extruder med motor

949 kr

Tilgjengelighet 1 på lager

Kategori:

micro form factor
featherweight (48g)
small footprint
enhanced filament grip.

Includes full size LGX Large Gears, maintenance windows and filament tension lever with 3 presets (open; rigid; flexible).

This extruder only supports 1.75 mm size filament.

The Bondtech LGX Lite is a filament feeder based on the LGX® Large Gears eXtruder and uses Bondtech’s new Dual Drive Technology based on larger drive gears.

Each LGX Lite extruder is supplied with:

  • 1x LGX Lite feeder;
  • 1x LDO Nema14 Round 20mm pancake stepper motor;
    • 1m long lead cable
    • with JST-XH 4-pin connector
  • 1x 2mm Hex Key (recommended tool);
  • 1x Powered By Bondtech sticker.

Also shipping with additional accessories:

  • 1x Push-fit collar
  • 1x 30mm PTFE tube to use in the PTFE Tube Adapter.
  • 8x M3 square nuts for reinforcing mounting holes.

8 features of this Bondtech eXtruder:

  • Larger drive wheels, for increased filament grip;
  • Filament pre-tension lever, for repeated results;
  • Drive wheels’ maintenance windows, for easy cleaning;
  • Compact, light & centered filament path, for increased performance and compatibility;
  • Multiple mounting hole patterns, for easy and flexible setup;
  • Compatible with Nema14 round stepper motors;
  • Craft boxes without bleaching & no coating.
  • Nylon housing with no dyeing or other chemical post processing.
3D Printed Housing using PA12

The housing parts are professionally printed with polyamide 12 for maximum strength, precision and higher temperature resistance.

To lower our ecological impact we are reducing our use of chemical dyes. This part is supplied with a wax protective coating to lower sensitivity to moisture and grease, while remaining fully functional.

Bondtech LGX Lite er en filamentextruder basert på LGX “Large Gears eXtruder”, og bruker Bondtech sin nye Dual Drive teknologi basert på store drivgir

  • Større drivhjul for forbedret filamentgrep
  • Presatt filament tensionhendel, for repeterbare resultat
  • Vindu til drivhjulene gir enkelt vedlikehold
  • Kompakt, lett i vekt og symmetrisk design. Sentrert filamenthull for forbedret prestanda og kompabilitet.
  • Flere monteringshull gir enkel montering og fleksibelt oppsett
  • Produsert på SLSprinter med PA12Nylon for maksimal styrke og høyere temperaturresistanse

 

 

Skroll til toppen