FT232RL 3.3V 5.5V FTDI USB to TTL Serial

Tilbud!

FT232RL 3.3V 5.5V FTDI USB to TTL Serial

40 kr

Tomt på lager

Kategori:

FT232RL 3.3V 5.5V FTDI USB to TTL Serial Adapter Module

  • Support OSD parameter adjustment and setting of f3f4 cc3d naze32 flight control
  • Arduino Pro Mini board comes without built-in USB circuitry, so an off-board USB-to-TTL serial adapter/Converter must be used to upload sketches.
  • The FTDI USB 3.3V 5.5V to TTL Serial Adapter/Converter Module is an ideal choice for this purpose.
  • Chip: FT232RL
  • Draw out all signal port of FT232RL chip
  • RXD / TXD transceiver communication indicator
  • USB power supply, can choose 5V or 3.3V, set by jumper
  • With over current protection, using 500mA self-restore fuse
  • Pin definition: DTR, RXD, TX, VCC, CTS, GND
  • Pitch: 2.54mm
  • Size: 36 x 18mm (L x W)
  • Interface: Mini USB
Skroll til toppen