Geeetech Reprap Ramps1.4 RRD Fan Extender for DUAL-EXTRUSION

Geeetech Reprap Ramps1.4 RRD Fan Extender for DUAL-EXTRUSION

80 kr

Tilgjengelighet 1 på lager

Kategori:
If you build or upgrade your printer with/to DUAL-EXTRUSION (2 extruder) including a heated bed all the output ports (D8,D9,D10) will be used. In this case there is

not option to connect a firmware controlled FAN to RAMPS board directly. However in Sprinter/Marlin firmware there is an option already (Marlin: BOARD=34) which
redirects the FAN to RAMPS output D4. But this solution needs a «buffer/driver»in order to work.
The RRD-FAN-EXTENDER is exactly what you need in this case. It is a plug and play solution to mount the FAN for DUAL-EXTRUSION setups with RAMPS1.4. But instead of
adding only one additional output port the RRD-FAN-EXTENDER is equipped with 2 PWM controllabe channels(D6/D11). The second channel can be used for another fan
(e.g. to cool the stepper driver) or for adding light control (e.g. add dimmable LED light to your machine).

Features:

  • max 20V
  • 2 (PWM controllable) channels (D6/D11)
  • max 0.5A per channel (enough for a really big fan)
  • flexible output voltage (you can connect the RRD-FAN-EXTENDER to 12V,5V,… in order to support the output voltage you need)
  • each channel has a fly back diode
  • easy setup (plug and play)
  • already supported by Marlin firmware (choose «#define MOTHERBOARD 34»)
  • easy to adapapt to other firmware (e.g. Sprinter: just change «#define FAN_PIN 6» in «pins.h»)
 
You can use it as follow: 
Fan4.jpg
Skroll til toppen